Acnodes OPC 8190 Instrukcja Użytkownika

OPC 8190 19 inch Open Frame LCD Panel User Manual OPC8190: 19” Industrial Open Frame LCD Panel with Atom N270 1.6GHz processor

1.2.3 System Specification  19”(1280x1024) TFT LCD  One VR for brightness control  Touch (equip on OPC81901x0-830-R model

1.3 Product List Product Name LCD Size Resolution Touch OPC8190 19” 1280 x 1024 N OPC8190 19” 1280 x 1024 Y

1.4 Dimensions OPC8190 without touch dimensions

OPC8190 with touch dimensions

1.4 I/O Outlets Please refer to the following illustration for I/O locations of OPC8190. No Function No Function 1 POWER SWITCH (A

1.5 Packing List When you receive the OPC8190, the bundled package should contain the following items:  OPC8190 unit x 1  Driver CD

CHAPTER 2 HARDWARE INSTALLATION The OPC8190 provides rich I/O ports and flexible expansions for you to meet different demand, for exam

Step 2 When users open the back cover, there is a cable connecting between a fan

Step 3 Remove the connector first before remove the back cover totally. Step 4 After

Step 5 Before closing the back cover, users must connect the fan cable to the motherboard first. Step 6 Then

Disclaimers This manual has been carefully checked and believed to contain accurate information. ACNODES Corp. assumes no responsibility for

2.2 CF card Installation The OPC8190 provides one CF slot for users to install CompactFlash™ card. Pleas

2.2 Serial Ports Interface OPC8190 has four serial ports. COM1 is RS-232/422/485, while COM2, COM3, and COM4 are RS-232. The

When COM1 is set to RS-422 or RS-485, the pin assignments are listed below: Pin # Signal Name RS-422 RS-485 1 TX- DATA

2.3 Ethernet OPC8190 is equipped with a high performance Plug and Play Ethernet interface, full compliant with IEEE 802.3 standard, and

2.4 Openframe and VESA Mountings There are two mounting ways for the OPC 8190, openframe and VESA mountings. 2.4.1 Openframe Mountin

2.4.2 VESA Mounting OPC8190 provides two types of VESA holes, 75mm x 75mm and 100mm x 100mm. These VESA holes can easy for users to ins

2.5 HDD Installation The OPC8190 provides a convenient Hard Disk Drive (HDD) bracket for users to install 2.5” SATA HDD. Please fo

Step 4 Fix the HDD bracket into the system, and plug the data and power cable to HDD. Installation completes. Da

2.6 DRAM Installation OPC8190 provides one 200-pin DDR2 SODIMM socket that support system memory up to 2GB. Please follow st

Step 3 Installation completes.

Safety Approvals  CE Marking  FCC Class A FCC Compliance This equipment has been tested in compliance with the limits for a

2.7 Wireless LAN Card Installation OPC8190 provides one Mini card slot for user to install one wireless LAN card. When ins

Step 3 Remove the antenna plug from the top of back cover. Step 4 Install the antenna cable on the back c

Step 5 Install the antenna on the antenna connector. Step 6 Connect the antenna cable to wireless LAN card.

CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration throug

F10 The <F10> key allows you to save any changes you have made and exit Setup. Press the <F10> key to save your changes. Es

System Time or System Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arr

 Configure advanced CPU settings This screen shows the CPU Configuration, and you can change the value of the selected option.

 IDE Configuration You can use this screen to select options for the IDE Configuration, and change the value of the selected option. A desc

 SuperIO Configuration You can use this screen to select options for the SuperIO Configuration, and change the value of the selected option. A de

 Hardware Health Configuration This screen shows the Hardware Health Configuration, and a description of the selected item appears on

Safety Precautions Before getting started, please read the following important safety precautions. 1. The OPC8190 does not come equipped with a

 ACPI Settings You can use this screen to select options for the ACPI Settings, and change the value of the selected option. A descrip

Disabled Set this item to prevent the chipset power management and APM (Advanced Power Management) features. Enabled Set this item to allo

Disabled This setting prevents hard disk drive power down mode. Suspend This option cuts the power to the hard disk drives during a system suspend

default setting is On/Off. On/Off Pushing the power button turns the computer on or off. This is the default setting. This is the default settin

 MPS Configuration This screen shows the MPS (Multi Processor Specification) Configuration, and you can change its value. A descripti

 PCI Express Configuration This screen shows the PCI Express Configuration, and you can change its value. A description of the selecte

 USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A

3.5 PCI PnP Menu The PCI PnP menu allows users to change the advanced settings for PCI/PnP devices. (1)

 Clear NVRAM (2) Use this item to clear the data in the NVRAM (CMOS). Here are the options for your selectio

and Yes.  Palette Snooping Some old graphic controllers need to “snoop” on the VGA palette, and then map it to their display as a way

 Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to

3.6 Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of t

 Boot Settings Configuration  Quick Boot Enabling this item lets the BIOS skip some power on self tests (POST). The default setting is Ena

IRQ. Here are the options for your selection, Auto, Enabled and Disabled.  Wait For ‘F1’ If Error If this item is enabled, the system wait

 Removable Drives Use this screen to view the removable drives in the system. The BIOS will attempt to arrange the removable drive boo

 Lan Boot Settings Configuration The Lan Boot Settings Configuration can enable or disable Lan Boot ROM to allow the system boot on LAN.

3.7 Security Menu The Security menu allows users to change the security settings for the system.  Supervi

menu. You can use the sub menu to change the user password.  Boot Sector Virus Protection This option is near the bottom of the Securi

3.8 Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left f

 North Bridge Configuration  DRAM Frequency This item allows you to control the Memory Clock.  Configure DRAM Timing by SPD Th

Table of Contents Disclaimers ...ii Safety Approvals...

 South Bridge Configuration (1)

(2)  USB Function This item allows you to enable or disable USB function.  USB 2.0 Controller This item

This item allows you to set or disable the PCI Express Ports. 3.9 Exit Menu The Exit menu allows users to load your system configura

Use this item to abandon all changes.  Load Optimal Defaults It automatically sets all Setup options to a complete set of default sett

CHAPTER 4 DRIVERS INSTALLATION 4.1 System FDK supports Windows 2000/XP. To facilitate the installation of system driver, please car

4.2 Touch Screen The FDK uses the 5-wire analog resistve. There are the specification and driver installation which are liste

3. Click Start menu and select “PenMount Utilities”; and then, a “PenMount Control Panel” pops out.

4. Select the “Standard Calibrate” tab. 5. Calibration: To adjust the display with touch panel, click “Calibration” and follow th

4.3 Embedded O.S. OPC8190 provides the Windows XP Embedded and Windows CE.Net 6.0. The O.S. is supported devices which

3.8 Chipset Menu... 57 3.9 Exit Menu ...

CHAPTER 1 INTRODUCTION This chapter contains general information and detailed specifications of the OPC8190. Chapter 1 includes the fol

1.2 Specifications 1.2.1 Main CPU Board  CPU  AtomTM N270 1.6GHz processor with FSB 533MHz onboard  System Chipset  945GSE